Getting The Essential Needed For Roofing Inspections in Littleton, CO

It's vital to remain productive and mentally focused throughout self-isolation in Littleton, CO. Roofing inspections is something any homeowner can do. With the help of professional roofing consultations in Littleton, CO, you can thoroughly inspect your roof and learn more about its overall condition with the right equipment.

You don't need too much equipment when inspecting your roof. You'll only need a ladder and pry bar to check the overall condition and undersides of your roofing materials. In doing so, you can ascertain its actual state and report this back to your roofer.

Essential repair equipment you might need isn't roofing nails and hammers. It's best to have a hardware store handy to help you have a tarp on hand when you need it to block suspected leaky areas. Additional measuring and moisture measuring equipment will help you find hard-to-find leaks on your roof.

However, if this all sounds tedious to perform, a visual inspection of your roof from ladders or the ground is well enough to help you ascertain its condition.

If you'd like to know more about the overall equipment roofers use to inspect and perform roofing maintenance, here are all the equipment professional roofers use, according to Roof Slope.

Roofing Hammer

A good roofing hammer is a must for any commercial roofing contractor. Roofers use roofing hammers for removing misplaced tiles, tapping down nails and cleaning their work areas. These hand tools come in various shapes as some look like a hatchet, while others resemble a standard hammer although there’s a missing claw.

Roofing Nailer

When only a few shingles need replacing, a hammer is sufficient. But when a roofing contractor has to replace an entire roof, a power nailer is needed for speeding up the installation process. In fact, a roofing nailer is the main tool used by a commercial roofer. The best type of nail gun for roofing is known as a coil nailer, which comes in various sizes for accommodating different nail lengths. These tools are available in both battery and pneumatic styles.

Shingle Remover

Shingle removers come in several versions. One specific kind looks like a shovel containing teeth although there are other types used for various applications. Some versions are intended to be used for tearing off shingles. Others, which include wheels and a cart, are designed removing existing roofing into a roll.

Utility Knife

A roofing contractor uses a utility knife to cut roofing material, such as shingles, so they’re the proper size and shape. A utility knife that’s specialized for roofing contains a knob for opening and closing it so that there’s no need for a screwdriver. The blade, which is secured by a magnet, is hooked, making it easier to cut shingles and felt. (Continued)

If you need exceptional roofers with long-term experience to help you with everything your roof needs after this period of self-isolation, don't hesitate to call us at Roper Roofing for help. Contact us today to learn more about everything that we can do for you!


795 McIntyre St. Suite 303
Golden, CO 80401

Phone: 720-809-7586



© All Rights Reserved 2021 Roper Roofing | Privacy Policy | Disclaimer